How to Lower Storage Container Condensation
When you store items in a standard shipping container
outside, they are more susceptible to condensation. This can lead to
condensation building up on the ceiling. Moisture damage in storage containers
can be caused by the simple fact that warm, humid air can hold more moisture
than cold air. It's like dewy grass on a summer morning. The temperature of a
shipping container, a metal box, can quickly affect its condition. Humidity can
develop inside a shipping container when it gets warm. Moisture can get into
the container via evaporation or external sources. As the container cools,
water droplets can form. Usually, these droplets form on the ceiling. Once the
droplets get large enough, they will drip onto your stored items. If you don't
address this, you could get a micro rainfall cycle which can cause water damage
to your stored items.
Suppliers of container desiccant are not airtight. However, they will
"breathe", due to temperature cycles. When the pressure inside the
container drops, it cools. The pressure is equalized by moisture and air moving
in from outside. If the container is heated up, the opposite can happen. But it
is easy to see how a repeated cycle of breathing can lead a build-up inside the
container of moisture, especially if the packing material is absorbent.
Before you place your items into a Shipping Container,
ensure that the interior is dry. Begin by locking your eyes. Then, open the
container with one hand. Move to the side walls and then to the back. Any holes
should be easily visible. You should check that the seals on your container
doors are weatherproof and secure. They have a dual seal. The outer seal stops
water from entering via wind or wave. The inner seal keeps water from entering
the container. If that happens, the water will drain around the door frame,
allowing it to drain out of the bottom. Make sure you check the top seal and
the side seals.
Dampstick Poles, a product developed by our research to reduce moisture in storage containers, can be used on the interior of the container. It is recommended that you place at least two Dampstick Poles into a 20' container. If you plan to store your goods for a prolonged period of time, it is important to exchange used Dampstick Poles at least once every three to six months. Nearly all Shipping Containers include these on the ceiling perimeter, as well as the floor, for cargo lashing. But, in the rare event that there are none, visit your local hardware store to purchase good quality stick on hooks. Clean the application spots, and hang the Dampstick from them.
Comments
Post a Comment